Email: Huttons@gmx.com Telephone: 01202 481706 Fax: 01202 481708
5 Hughes Business Park, Wilverley Road, Christchurch, Dorset BH23 3RU
Jurby Nurseries & Water Gardensm Jurby Coast Road
Jurby IM7 3AS – Telephone: 01624 897158
No need to remove fish for curing, leaks or adding elements to your pond.
Bonds all materials even under water e.g.
For best results clean all surfaces, to be free of grease, algae. Place sealer directly onto the surface you wish to bond/seal. For bonding
where there is movement (expansion & contraction) of different substrates, leave a minimum 2mm thickness of bead between surfaces. Where there
is livestock near the sealer, protect from ingestion while curing.
Full cure 24 hours. Initial tack 2-3 Hours.
Can be painted over up to 4 hours.
For Clear Gold Label, cure for 36 hours
see packaging for details or download PDF below.
Shelf life 12 months if stored in dry conditions between 10-25°C
Available in 290ml tubes
Colours : White – Black – Grey – Brown Clear
(Silicone gun required – not included)
Also
One-Shot 75ml (Black & Clear)
with trigger nozzle (silicone gun not required)
Can I actually use this in wet conditions ie rain or under water?
Yes. Gold Label is able to stick to a surface by displacing moisture from the surface.
Will it cure under water?
Yes, as it uses the oxygen in the water to cure.
Does temperature affect it?
In its uncured state, it does. It will not cure below freezing and it will be very slow curing under 5°C. Optimum temperature is 16°C.
I cannot get it to stick
Most common reason is trying to use it as a glue! It is a sealant which needs a body of product to work. If you squash the surfaces to be
stuck then the area cannot affect a cure. Always apply a bead approx 5mm and gently attach object or liner patch to leave a bead of approx 2-5mm
(Do not be tempted to pull it off to see if it is stuck before 3 days as temperature and thickness of sealer will affect the cure rate)
Can I use it to repair gutters, roofs etc?
Yes, Gold Label will stick to most surfaces.
Will it stick to vinyl?
Yes, make sure surface is clean and sound, and abrade lightly.
Can I use Gold Label in marine tanks?
Yes, there is no difference in performance between fresh water and salt water.
Can I use Gold Label to stick living rock or coral?
Yes, because Gold Label is an inert, non-toxic product it can be used safely on coral or living rock.
I need to use acrylic glass for safety in my pond / tank. Will Gold Label stick the acrylic to the frame?
Gold Label has 4 times the bond strength of silicone on acrylic and has been used in major installations using acrylic sheet.
Can I use Gold Label to fix equipment eg pumps, filters to the side of ponds or tanks?
Yes, make sure you bed the equipment on a bead of sealer at least 5mm. This is to allow slight movement between the two surfaces and
support for 24 hours to allow the sealer to cure before any weight is put on it.
Can I join two pieces of liner together?
Yes, by putting two beads of 5mm diameter, 100mm apart on the overlap. Then gently run your fingers over the line to make sure the
sealer has connected both pieces of liner. DO NOT PRESS FLAT. By having two beads of 5mm, the liner can expand and contract without
tearing and it will allow for any imperfections in joining of the two liners.
Do I have to drain the pond/tank before using Gold Label?
No, you can use this under water to bond practically anything.
Can Gold Label be used to stick rockery/decking/slabs/slate etc to the surround of the pond or the liner?
Yes, Gold Label has a very strong bond to most surfaces. If the product you wish to stick is powdery, it is advisable to seal it with
a primer first – contact us for advice.
Can I use Gold Label in swimming pools / spas?
Yes, this will adhere even in chlorinated water.
Can I fix a crack in a concrete pond / pool?
Yes. First vee-out the crack to approx 10-20 mm and fill with Gold Label. If concrete is powdery, use primer first.
If your Question has not been answered please contact us
Specially formulated for Fish Tank Construction/Repair
A special formulation for fish tank construction and/or repair. Adheres to dry, clean and grease-free glass
Application:
For optimum structural strength use a triangular joint shape and avoid thin layers.
Fill the aquarium with water ONLY after sealant is totally cured. Vulcanisation rate 1-2mm /24 hours. Clean excess with white spirit – use
only in well ventilated areas. Keep away from children. Avoid contact with eyes and skin. If contact with eyes, rinse thoroughly with
water & contact doctor.
Technical data sheets available.
Manufactured under ISO 9002 quality system
Shelf Life 12 months if stored in dry condition
Available in 310ml tube Black or Clear
(Silicone gun required – not included)
SMALL
approx 140mm x190mm (5½ x 7½)
MEDIUM
approx 280mm x190mm (11” x 7½)
LARGE
approx 280mm x 380mm (11” x 15”)
Size 25mm x 3mm
Before painting check your surfaces for imperfections, cracks etc and fill where appropriate. For large cracks in the concrete, vee out
the cracks to approx 10mm – make sure the surface to be bonded is solid and dust free. Fill with Gold Label Pond & Aquarium Sealer. Painting
can then commence immediately. Although Aqua Pond Paint is much safer than normal resin systems, it is recommended you should avoid contact
by using barrier cream or gloves. Any splashes should be washed off with soap and water.
Method of use
Do I need to use a primer first?
answer. No – Aqua Pond Paint is self priming as long as the surface to be coated is sound
Do I have to mix all of the paint and hardener at the same time?
No, you can split it into equal amounts and store the rest for later
Do I need a dry surface to put the paint on?
No, as long as it is not raining and the air temperature is above 10 °c and below 20 °c you can apply onto damp concrete the normal
curing times apply. NB If rain is expected after application, protect for the initial cure time of 6-8 hours
Do I need any special equipment to apply the paint?
No special equipment is needed – only a brush or roller or, if speed is required, a spray gun
How quickly can I refill my pond?
Refill can start between 3 and 7 days, depending on the atmospheric conditions ie air temperature and moisture content
If your Question has not been answered please contact us
Removes excess sealer from tools etc
Directions for use:
To remove excess sealer, soak a cloth with the solvent and wipe excess sealer from surface. Can be used to remove contaminates (eg grease) from surface before applying sealer.
Protects Hands & Protects Fish
We always welcome new trade
Please fill in the form below or telephone Sales on 01202 481706
